Self-priming centrifugal pump failure analysis

Centrifugal pump with its simple structure , easy maintenance , high efficiency and become the most widely used in agriculture as a pump , but also because sometimes mention no water and people feel troubled . No water present on the deliberate failure to mention the reason to be analyzed.

      Inlet and an air pump body
    ( 1 ) Some users are not filled before the start of the pump enough water ; sometimes looks irrigation water overflow from the bleed hole , but did not turn the pump shaft post air completely discharged , resulting in a little air still remained in the inlet or the pump body .
                
    ( 2 ) in contact with the pump into the water against the flow direction of the horizontal section of the application of the down slope of 0.5% or more , the pump inlet connected to one end of the highest level do not completely . If the upward tilt , will be retained within the inlet air , reducing water pipes and pumps in the vacuum, impact -absorbent.
                
    ( 3 ) a filler pump has been used for a long wear or too loose packing too , causing a lot of water from the filler and the discharge gap between the sleeve shaft , the result is the outside air into the gap from the interior of the pump , affecting the carrying water .
    ( 4 ) into the water because of potential long-term underwater corrosion wall having holes , declining water pump after work , when these holes out of the water , the air from the hole into the inlet pipe .
    ( 5 ) into the water pipe bend cracks , into the pipe connecting the pump occurs at a slight gap , may allow air into the intake pipe .

 

Previous: Yang Cheng centrifugal pump and flow relationships

Next: Talk about the developing trends of high-lift chemical pump, pump industry in our country

Product Code
CONTACT US
ZHEJIANG YONGKANG XUGUANG MECHANICAL&ELECTRIC CO., LTD
ADD:No.299 Xishan Road ,Economic & developed zone,Yongkang,Zhejiang,China
Home marekt Tel: 0579-87225129
M.T: 15258998055
Foreign Trade Market Tel: 0579-87225686
E-mail:ykxuguang@163.com
             
xg@xrispower.com
http://www.goldenpump.com

 

Copyright © 2013 Zhejiang Yongkang Xuguang Mechanical&Electric Co., Ltd All rights reserved. manage Support:www.it579.net